Mobile Video With ADAS Range/Digit D-Cam M1N 2.0
6-Channel AI MDVR For Heavy Vehicles
Digit D-Cam M1N 2.0
Every Angle Covered, Every Second Secured, Every Story Proven.
A forward camera shows the road, but the M1N 2.0 shows the whole vehicle. It records up to six Full HD cameras at once, while built-in ADAS, DMS and BSD watch for risk. In addition, it stores up to 2TB of SSD evidence and streams live view over 4G. Therefore, it is the flagship AI MDVR for heavy vehicles in the Digit D-Cam range.
Why It Exists
The Problem Isn’t Footage. It’s Coverage.
Most heavy-vehicle incidents don’t happen in front of the windscreen. Instead, they happen beside the trailer, behind the bus, at the loading bay or at the door. The forward camera saw nothing, the driver saw part of it, and the third party saw an opportunity. So without footage from the angle that matters, the facts become negotiable. As a result, claims stall, liability drifts and cargo goes missing with nobody able to say where.
The Digit D-Cam M1N 2.0, an AI MDVR for heavy vehicles, closes those gaps. Up to six cameras record in Full HD at the same time, covering the road ahead, the driver, both sides, the rear and the cargo bay. Every channel then lands on one timeline, linked to location, speed, G-force and vehicle data. So when something happens, you don’t piece the story together. Instead, you press play.
What It Does
Digit D-Cam M1N 2.0: Six Views, One Truth, Total Control
All six inputs record 1080P video and audio in real time, while an AHD output feeds a cab monitor.
An onboard NPU runs road-risk, fatigue, distraction and blind-spot detection on two channels, so you set the AI per vehicle.
4G LTE runs on main and diversity antennas, while GPS, BeiDou, Galileo and GLONASS fix the position. Wi-Fi 5 and eSIM are also available as options.
Two microSD cards (up to 512GB each) back up an M.2 SSD of up to 2TB, which also has a heater for cold starts. Finally, a key locks the storage bay.
Two CAN-FD buses, eight inputs, two outputs, 2× RS232 and 1× RS485 connect to the vehicle. iButton driver ID and a speed input also tie every event to a driver.
It operates from −40°C to +70°C and meets ISO 16750 and ISO 7637. Triple vibration reduction also protects the recording on corrugated roads.
Every Channel Has A Job
Truck & Bus Camera System Layouts: Six Views, One AI MDVR
Four AHD and two IP camera inputs record in Full HD at the same time. Two of those channels also carry the built-in AI. DigitFMS surveys and specifies every vehicle individually, but most heavy fleets follow one of these layouts.
Heavy Truck
| CH1 | Forward road (ADAS) |
|---|---|
| CH2 | Driver (DMS) |
| CH3 | Nearside (left) side, BSD-ready |
| CH4 | Offside (right) side |
| CH5 | Rear and reversing |
| CH6 | Cargo or trailer interior |
Bus & Coach
| CH1 | Forward road (ADAS) |
|---|---|
| CH2 | Driver (DMS) |
| CH3 | Front passenger door |
| CH4 | Saloon |
| CH5 | Rear passenger door |
| CH6 | Rear and reversing |
Generally, the built-in AI runs ADAS and DMS. On blind-spot-critical routes, however, BSD takes one of the two AI channels.
Under The Lid
Digit D-Cam M1N 2.0: The Flagship AI MDVR For Heavy Vehicles
Designed for long-haul and logistics, bus and coach, mining, cash-in-transit and security, fuel distribution, cold-chain and municipal fleets.
| Configuration | 6CH AI MDVR, model M1N2.0-H0402 |
|---|---|
| Video | 4CH AHD + 2CH IPC, up to 1080P; 6CH real-time recording; AHD monitor output |
| Encoding | PAL: 4× 1080P@25fps + 2× 1080P@30fps · NTSC: 6× 1080P@30fps |
| Audio | 6CH input (4 AHD + 2 IPC), 1CH output, two-way intercom |
| Onboard AI | Built-in NPU; 2CH AI for ADAS, DMS and BSD; iButton driver ID; 6-axis accelerometer |
| Storage | 2× microSD (512GB each) + 1× M.2 SATA SSD up to 2TB, heated; key-locked door |
| Connectivity | 4G/3G, main + optional diversity antenna; Wi-Fi 5 and eSIM optional |
| Positioning | GPS, BeiDou, Galileo and GLONASS; external IP67 antenna |
| Interfaces | 2× CAN-FD, 8 in / 2 out, 2× RS232, 1× RS485, USB 2.0, speed input, IR |
| Power | DC 9–36V; under 10W bare unit, under 40W typical |
| System | NPU, 1GB RAM, 8GB ROM, Linux; Digit-Web platform, PC client, OTA |
| Build & environment | −40°C to +70°C (storage to +85°C); ISO 16750 / 7637; triple vibration reduction; 154×151×52mm, 1.7kg |
The full Digit D-Cam M1N 2.0 factsheet also covers channel layouts, capabilities and complete specifications in one PDF.
Download The Factsheet (PDF)What You Get
Six Ways The M1N 2.0 Pays For Itself
Settle Side & Rear Disputes
Multi-angle footage settles side, rear and passenger disputes on facts rather than statements.
Reduce Insurance Exposure
Verified, time-stamped evidence also supports claims and liability outcomes.
Coach Drivers On Facts
DMS and ADAS events show fatigue, distraction and following distance, so coaching starts from real footage.
Protect Cargo & Doors
Dedicated cameras cover the cargo bay, while sensor-triggered events flag every door.
Keep Evidence Safe
Because storage is dual and the drive bay locks, footage survives card failure and tampering.
See The Full Context
Every clip also links to driver ID, location and CAN vehicle data on one timeline.
“Before telematics, we were reacting to problems after they happened.
Now we can spot unusual activity early and deal with it before it affects the operation.”
Thabo, Operations Manager · TC Transport · 25+ Vehicles
FAQ
Digit D-Cam M1N 2.0: FAQs
How is the Digit D-Cam M1N 2.0 different from a standard MDVR?
A standard MDVR records footage and waits for someone to go looking. In contrast, the M1N 2.0 is an AI MDVR for heavy vehicles that works as a complete video telematics platform. It combines up to six Full HD cameras, built-in ADAS, DMS and BSD, and four-constellation positioning. It also adds 4G live view and CAN-FD vehicle data in one hardened unit. As a result, your fleet moves from searching for evidence to acting on it.
Where does the M1N 2.0 fit in the Digit D-Cam range?
It is the flagship. The NL19 and NL21 cover two- to four-camera installs, while the M1N 2.0 steps up to six channels. It also adds an M.2 SSD of up to 2TB and two CAN-FD buses, and it operates from −40°C to +70°C. So it is the right fit for heavy vehicles, buses and harsh-duty fleets where every angle counts.
How many cameras does the M1N 2.0 support?
Six: four AHD and two IP camera inputs, all recording in Full HD at once. On a heavy truck, the six views typically cover the road, driver, both sides, rear and cargo. On a bus or coach, however, the side channels usually cover the passenger doors and saloon instead. Either way, DigitFMS surveys and specifies every vehicle individually.
What happens to footage if a card fails or someone tries to remove it?
Recordings can spread across two microSD cards (up to 512GB each) and an M.2 SATA SSD (up to 2TB). That leaves room for backup copies and long retention. In addition, the storage door locks with a key, and the SSD has a heater for cold starts. Event clips can also go to the platform over 4G, subject to network coverage.
Can the M1N 2.0 handle mining, long-haul and extreme conditions?
Yes. As an AI MDVR for heavy vehicles, the M1N 2.0 operates from −40°C to +70°C. It also meets the ISO 16750 and ISO 7637 vehicle test standards and uses triple vibration reduction. Its connectors are also automotive-grade and quick-release, while the external GNSS antenna is IP67. Meanwhile, DigitFMS installs the recorder in a protected position inside the vehicle.
Can you view footage and alerts remotely?
Yes. Over 4G, authorised users get live view, remote playback and real-time alerts on the Digit-Web platform. A PC client and an optional mobile app also give access. Each alarm clip also carries GPS information and accelerometer data, so the context travels with the footage. However, remote access depends on network coverage and system configuration.
Is the Digit D-Cam M1N 2.0 a truck camera system or a dash cam?
It is a full truck and bus camera system: a 6-channel AI MDVR that records Full HD on every camera angle, with ADAS, driver monitoring (DMS) and blind-spot detection (BSD), and stores up to 2TB on SSD. A dash cam covers the road ahead; the M1N 2.0 covers the whole vehicle.
DigitFMS, a PSiRA-registered security service provider, installs and supports the Digit D-Cam M1N 2.0. ADAS and driver-monitoring alerts support the driver, but they do not replace attentive driving. Remote access also depends on network coverage and system configuration. Finally, insurance outcomes depend on your insurer and policy terms.
Every Angle Covered
When Every Angle Is On Record, Every Argument Ends
One short form is all it takes. Then a DigitFMS specialist comes back within one business day to spec the M1N 2.0 for your fleet. That also covers camera layout per vehicle, AI channels, storage and how it plugs into your existing tracking platform.
The Rest Of The Range
One Platform — A Camera For Every Fleet
The M1N 2.0 is the flagship AI MDVR for heavy vehicles in the Digit D-Cam family. Every camera in the range reports into the same DigitFMS platform and control room. So pick the unit that fits the vehicle, and keep the intelligence in one place.



